Skip to content

Programs

Lyle McDonald Generic Bulking Routine guide and free spreadsheet

Intermediate · 4 days a week · 6 to 8 week cycles, then a deload · Four-day upper/lower split for muscle size, each muscle twice a week, with set and rep ranges

A four-day upper/lower week for lifters past the beginner stage who want muscle size, with set and rep ranges that let you adjust to how you feel that day.

Free. The spreadsheet needs no account.

How Generic Bulking Routine works

Lyle McDonald, the nutrition and training writer behind Bodyrecomposition, posted the Generic Bulking Routine on his forum. His original post no longer has a page of its own, so this guide draws on JCDFitness, which preserved his text, and on write-ups from Legion, Liftosaur and Lift Vault. Lyle describes it as a middle-of-the-road design: each body part about twice a week, with intensity a little below DC training and above HST, and sets stopped about a rep short of failure.

The week is four days: lower on Monday, upper on Tuesday, then the same pair on Thursday and Friday. Lyle's note for the second pair is to repeat the first or make slight exercise substitutions. He gives the deadlift with leg press as one lower swap, and incline bench with pulldowns moved to the front of the upper day as one upper swap. This page repeats the first pair so the sheet and Train stay simple. Legion adds two scheduling rules: alternate lower and upper days, and never train more than two days in a row. Lyle lists lower first, and Legion says to keep it that way because a sore upper body drags down your squats and deadlifts. Lift Vault flips the order to upper Monday and Friday, lower Tuesday and Thursday, so the order is yours to pick.

The lower day runs squat, a hamstring hinge (stiff-leg deadlift or leg curl), leg press, a second hamstring movement, standing calf raise and seated calf raise. The upper day runs flat bench, row, an incline press or shoulder press, a pulldown or chin-up, then triceps and biceps. The heavy lifts get 3 to 4 sets of 6 to 8 reps with 3 minutes of rest. The second lifts get 2 to 3 sets of 10 to 12 with 2 minutes. Arm work gets 1 to 2 sets of 12 to 15 with about 90 seconds.

Set counts are ranges on purpose. Lyle's answer, as Lift Vault and Legion quote it, is that 3 to 4 sets means you judge after the third. If you still look strong, do a fourth. If you look fried, stop at three. This sheet and Train list the low end of every range, so add sets when the session feels easy.

The weights in the sheet are a template for the first heavy week. Adjust them to your own lifts. This guide uses Romanian deadlift in place of the stiff-leg deadlift because Train has no stiff-leg deadlift; Liftosaur and Legion both name Romanian deadlift as an accepted swap. Leg curls, calf raises, triceps and biceps are in the Train workouts but not in the sheet, because you pick their weight by feel. The seated calf raise is in neither, since Train has no exercise for it.

Generic Bulking Routine program guide visual

The schedule

Train on Monday, Tuesday, Thursday, Friday, or any other days with rest between. Every set uses the same weight, the one you can lift for the written reps.

Lower body, first session

LiftSets and reps
Squat 3 x 6
Romanian deadlift 3 x 6
Leg press 2 x 10

Upper body, first session

LiftSets and reps
Bench press 3 x 6
Barbell row 3 x 6
Dumbbell shoulder press 2 x 10
Lat pulldown 2 x 10

Lower body, second session

LiftSets and reps
Squat 3 x 6
Romanian deadlift 3 x 6
Leg press 2 x 10

Upper body, second session

LiftSets and reps
Bench press 3 x 6
Barbell row 3 x 6
Dumbbell shoulder press 2 x 10
Lat pulldown 2 x 10

Progression and stall rules

Double progression: reps first, then weight

Pick a weight you can lift for the bottom of the range with a rep or two to spare. Add reps over the weeks. Once you reach the top of the range with a rep or two still in reserve, add weight and start again near the bottom. JCDFitness, which preserves Lyle's routine, tells readers to add weight when they hit the top of the rep range. The sources differ on when to move: Liftosaur waits until every set reaches the top of the range, while a reply in the JCDFitness comments allows adding weight once the first set gets there. In the spreadsheet's Progress tab, read each row of the 'Times you have done the lift' column as one weight jump on this routine.

Stop a rep short of failure

In his own words, Lyle recommends about a rep short of failure, so that the extra volume per workout can be done.

Start each cycle with two lighter weeks

The write-ups agree on an easier run-up but not on the numbers. Legion has week 1 at 85% and week 2 at 95% of the weight you could use for a set to failure at the top of each rep range (your 8-rep max for the 6 to 8 sets). Lift Vault reads the same advice as roughly 80 to 85% in week 1, then 5% more each week up to week 4. Pick one. Either way, the heavy push starts after it.

Jumps once you are pushing

Lift Vault says to add 2.5 to 5 lb to the larger lifts and 1 to 2.5 lb to the smaller ones when you hit the target reps with a rep or two in the tank. Legion says 5 to 10 lb. The sheet uses 5 lb (2.5 kg) for the big lifts and 2.5 lb (1.25 kg) for the dumbbell press. These are our defaults inside the quoted range, so change them in the Progress tab.

Run it in 6 to 8 week cycles, then deload

Legion describes 8-week cycles: two lighter weeks, then about six heavy weeks, then a deload week. Lift Vault and Liftosaur say 6 to 8 weeks, and Lift Vault says the deload lasts two weeks. Liftosaur suggests cutting volume by 40 to 50% in the deload week. Lift Vault starts the next cycle a little above the weights you used in your first run-up. Legion has you rebuild the run-up weights from your final heavy week.

If you stall

Liftosaur says to reduce the weight by about 10% after 2 or 3 sessions without added reps, then build back up. That is where the sheet's 10% deload comes from. If the volume is too much to recover from, Lyle's own fallback is one fewer set on the first two groups: 2 to 3 sets of 6 to 8 and 1 to 2 sets of 10 to 12.

Do not change exercises inside a cycle

Lift Vault notes Lyle does not recommend changes within a cycle. Swap an exercise during the lighter run-up weeks, when you can learn it and find its weight.

Weekly volume

Work sets per lift, counted from the schedule above (warm-ups not included).

Lift Sets per week
Squat 6
Romanian deadlift 6
Leg press 4
Bench press 6
Barbell row 6
Dumbbell shoulder press 4
Lat pulldown 4

Who it suits

A good fit

  • Lifters who have moved past beginner progress and want more weekly volume and a clear structure to build muscle. Legion puts the bar at about 12 months of steady training, and Liftosaur at 1 to 3 years with comfortable squat, bench, hinge and row form.
  • Lifters who can eat in a surplus. Liftosaur suggests 250 to 500 calories above maintenance, gaining about 0.5 to 1 lb a week.
  • People who can train four days a week and recover best with a day off after every two sessions.
  • Anyone who likes a plan with ranges and judgment calls rather than one fixed number of sets.

Look elsewhere if

  • True beginners who can still add weight every session. JCDFitness and Legion both say true beginners are better off on a simple novice program, and neither attributes that warning to Lyle.
  • Lifters who want a cut or fat-loss plan. The volume is hard to recover from on low food, and Lyle's own cutting advice is to keep the weight on the bar but drop to about 2 sets of 6 to 8 and 1 set of 10 to 12.
  • Anyone who wants every set, rep and exercise spelled out. The original gives categories and ranges, and you make the calls.
  • Lifters with only a barbell and dumbbells. The lower day assumes a leg press, a leg curl and calf machines. Liftosaur suggests Bulgarian split squats or front squats for the leg press, Romanian deadlifts or good mornings for the leg curl, and a weighted step for the calves.

Common mistakes

Starting too heavy

Pick weights you can lift at the bottom of each range with reps to spare. Start at the top of the range and you have no reps left to add before the weight goes up.

Training to failure on every set

Lyle's guidance is about a rep short of failure. Grinding the last rep of each set makes it hard to repeat the same session on Thursday and Friday.

Adding the extra set when you are tired

A fourth set is for when you still look strong after three. If your reps have slowed and your form is slipping, stop at the low end of the range.

Changing exercises mid-cycle

You cannot compare one week with the next if the lifts keep changing. Make swaps during the lighter run-up weeks at the start of a new cycle.

Skipping the lighter weeks

The run-up eases you into the volume and shows you real working weights. If you open the cycle at your hardest numbers, you have no room to add through the six heavy weeks.

Ignoring what the routine leaves out

Liftosaur points out the routine has no direct rear delt, side delt or ab work. Add a small amount at the end of sessions if those are weak points.

Your sample week

For each lift, enter: Weight you use for your working sets, at the bottom of the rep range. The weights below update as you type. Your numbers stay in your browser and are not saved. The numbers shown are an example lifter.

Lower body, first session

Squat
SetRepsWeight (lb)
1 6 185
2 6 185
3 6 185
Romanian deadlift
SetRepsWeight (lb)
1 6 135
2 6 135
3 6 135
Leg press
SetRepsWeight (lb)
1 10 270
2 10 270

Upper body, first session

Bench press
SetRepsWeight (lb)
1 6 135
2 6 135
3 6 135
Barbell row
SetRepsWeight (lb)
1 6 115
2 6 115
3 6 115
Dumbbell shoulder press
SetRepsWeight (lb)
1 10 30
2 10 30
Lat pulldown
SetRepsWeight (lb)
1 10 100
2 10 100

Lower body, second session

Squat
SetRepsWeight (lb)
1 6 185
2 6 185
3 6 185
Romanian deadlift
SetRepsWeight (lb)
1 6 135
2 6 135
3 6 135
Leg press
SetRepsWeight (lb)
1 10 270
2 10 270

Upper body, second session

Bench press
SetRepsWeight (lb)
1 6 135
2 6 135
3 6 135
Barbell row
SetRepsWeight (lb)
1 6 115
2 6 115
3 6 115
Dumbbell shoulder press
SetRepsWeight (lb)
1 10 30
2 10 30
Lat pulldown
SetRepsWeight (lb)
1 10 100
2 10 100

The spreadsheet

The file has three sheets: your numbers, the full week with every weight as a formula, and a progress table that carries the weights forward. It opens in Excel, Numbers and LibreOffice. The weights in the link below use the numbers you typed above.

Download the .xlsx

Open it in Google Sheets

  1. Download the .xlsx file above.
  2. Go to Google Drive and choose New, then File upload, and pick the file.
  3. Double-click the uploaded file and choose Open with Google Sheets.
  4. Choose File, then Save as Google Sheets so you can edit it.

Want the weights to follow you into the gym? Create a free account and the program loads into Train for you.

How it compares

Generic Bulking Routine vs Upper/lower split

Same four-day shape. The generic split on our site gives one set of numbers to follow. Lyle's routine adds three tiers of set and rep ranges, fixed rest times and cycles with a lighter start and a deload. Read the Upper/lower split guide.

Generic Bulking Routine vs PHUL

Also four days with every muscle twice a week. PHUL gives each half a heavy power day and a lighter size day. Lyle's routine repeats the same style on both days and puts the heavy and light ranges inside each session. Read the PHUL guide.

Generic Bulking Routine vs DC Training

Lyle describes his routine as sitting between DC training and Bryan's HST: lower intensity than DC, higher than HST, with more volume per workout than either. Pick DC if you prefer lower volume with harder effort, and this routine if you want the middle ground. Read the DC Training guide.

Load Generic Bulking Routine into Train and log each session against the plan.

Start it in Symmetric Strength

The workouts in Train show one set count and one rep target per lift, taken from the bottom of Lyle McDonald's ranges: 3 sets of 6 on the main lifts, 2 sets of 10 on the second lifts and 1 set of 12 on the arm work. The routine gives ranges (3 to 4 sets of 6 to 8, 2 to 3 sets of 10 to 12, 1 to 2 sets of 12 to 15), so add the extra set and the extra reps as you progress. Train has no stiff-leg deadlift or seated calf raise, so it carries Romanian deadlift and leaves the seated calf raise out. The Train days also hold leg curl, standing calf raise (3 sets of 6, as the heavy calf slot), triceps pushdown and barbell curl, which the sheet does not track. The two A and B days are the same workout, as the routine allows.

Common questions

What is the Generic Bulking Routine?

A four-day upper/lower routine by Lyle McDonald, posted on his forum around 2008 to 2009 (Liftosaur and Lift Vault give those years) and kept alive by JCDFitness and others. It prescribes categories of exercise with set and rep ranges rather than one fixed list.

How many days a week is it?

Four: Monday lower, Tuesday upper, Thursday lower, Friday upper. JCDFitness and Legion both describe a three-day version that alternates upper and lower days every other day if four is too much.

Is it only for bulking?

It is named for a calorie surplus, because the volume is easiest to recover from when you eat enough. Lyle's advice for a cut is to keep the load on the bar and lower the volume, not the weight.

How do I progress?

Add reps within each range, then add weight once you hit the top of the range with a rep or two to spare. The weights you use in the run-up and the size of each jump differ between write-ups, and the Progress rules on this page show both.

How long should I run it?

Legion describes 8-week cycles (two lighter weeks, then about six heavy weeks) and a deload week. Lift Vault and Liftosaur say 6 to 8 weeks, and Lift Vault says to deload for two weeks. JCDFitness's coach suggests sticking with it for at least 8 weeks and says there is no fixed end date.

Can I change the exercises?

Yes. Lyle's template names categories, such as a hinge, a pulldown or an incline press. Keep the same exercises through a cycle and swap them in the lighter weeks at the start of the next.

Is the volume enough, especially for arms?

Legion counts 10 to 14 weekly sets for most big muscle groups and calls that a solid target. It also points out that presses already work the triceps and pulldowns work the biceps, so arm volume is higher than the 1 to 2 direct sets suggest. If arms lag, Legion says to use the top of the range or add a set or two.

Is there a strength version?

Lift Vault lists two variants it attributes to Lyle: 3 to 5 sets of 5 on the main lifts with 8 to 10 reps on the second lifts, and 3 sets of 3 with 6 to 8 reps. It says to run them in order after a 6 to 8 week size cycle, or repeat one. The sheet and Train here use the original size version.

Do I need the deadlift?

It is not in the base template, which uses a stiff-leg deadlift or leg curl. Lyle's note for the second lower day offers deadlift with leg press as a swap. Keep it away from heavy squats in the same session, since lower-back fatigue would hurt both.

Know where you stand

Before you start, check how your lifts compare on the strength standards, estimate a max with the one-rep max calculator, or score your total with the DOTS calculator.

Sources and credit

The Generic Bulking Routine was created by Lyle McDonald and first posted on his Bodyrecomposition forum. The original post no longer has a page of its own, so this guide draws on JCDFitness, which preserved the text, and on Legion, Liftosaur and Lift Vault, and describes the routine in our own words. Where those write-ups disagree on progression, we say so. The in-app templates are our own simplified version.

Checked . Symmetric Strength is not affiliated with Lyle McDonald, Bodyrecomposition, JCDFitness, Legion, Liftosaur or Lift Vault. Program names are used only to identify the programs.